Missing Protection Mechanism for Alternate Hardware Interface
CWE-1299
Short description
Extended description
An asset inside a chip might have access-control protections through one interface. However, if all paths to the asset are not protected, an attacker might compromise the asset through alternate paths. These alternate paths could be through shadow or mirror registers inside the IP core, or could be paths from other external-facing interfaces to the IP core or SoC.
Consider an SoC with various interfaces such as UART, SMBUS, PCIe, USB, etc. If access control is implemented for SoC internal registers only over the PCIe interface, then an attacker could still modify the SoC internal registers through alternate paths by coming through interfaces such as UART, SMBUS, USB, etc.
Alternatively, attackers might be able to bypass existing protections by exploiting unprotected, shadow registers. Shadow registers and mirror registers typically refer to registers that can be accessed from multiple addresses. Writing to or reading from the aliased/mirrored address has the same effect as writing to the address of the main register. They are typically implemented within an IP core or SoC to temporarily hold certain data. These data will later be updated to the main register, and both registers will be in synch. If the shadow registers are not access-protected, attackers could simply initiate transactions to the shadow registers and compromise system security.
Best practices to prevent this CWE
Phase: Requirements
Protect assets from accesses against all potential interfaces and alternate paths.
Effectiveness: Defense in Depth
Phase: Architecture and Design
Protect assets from accesses against all potential interfaces and alternate paths.
Effectiveness: Defense in Depth
Phase: Implementation
Protect assets from accesses against all potential interfaces and alternate paths.